Description
Printing speeds up to 100mm/sec
Long stencil life, Wide process window
Clear residue
Low Voiding
Excellent wetting compatibility on most board finishes
Specifications
Alloy: Sn63/Pb37
Flux Type: Water-Washable
Flux Classification: REM0
Metal Content: 87% metal by weight.
Particle Size: T3 (25-45 microns)
Melting Point: 183C (361F)
Size: 100g syringe
Shelf Life
Refrigerated >12 months, unrefrigerated >1 month
Stencil Life
>16 hours @ 20-50% RH 22-28C (72-82F)
>8 hours @ 50-70% RH 22-28C (72-82F)
Stencil Cleaning
Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).
Storage and Handling
Refrigerate at 3-8C (37-46F). Do not freeze. Allow 4 hours for solder paste to reach an operating temperature of 20-25C (68-77F) before use.
Transportation
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.
WARNING! This product can expose you to Lead, which is known to the State of California to cause Cancer, Birth Defects, or other Reproductive Harm. For more information, go to: www.P65Warnings.ca.gov
Documents
Datasheet MSDS Sheet
|